Thursday, January 13, 2011

Barrel Chairs

Folks tend to either love or hate the barrel chairs that come in some of the Lazy Daze models. At least since they're free-standing, it's easy to remove them if you desire.

Since they are free-standing, as a safety precaution it's necessary to be sure the chairs are securely held in place with their seatbelts. In the event of an accident, you don't need a loose chair flying through the rig and smacking you.

There have been changes in the chairs somewhere along the LD line. The older chairs were narrower and fit the interior space better IMO. The new chairs have arms that are too wide to allow the opening of the table when the driver's seat is moved back and tilted (my normal driving position). I `narrowed' each chair about an inch, using a bar clamp and a couple of wooden blocks. You can now open the table without moving the driver's seat forward.

Ours is a 23.5' FL, other models may not have this problem.

Contributors: Larry Wade

Return to FAQ Index

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.